Science blog post #2

Tuesday: Today is the first day we got the project. We focused most of today on brainstorming and thinking of creative ways to make our house unique. We also started making our phet diagrams and worked on our house layout. Lastly, we also devided all ofour work, so we would complete everything evenely.


Wednesday: Today we brought in all our supplises to start working. Sadly, we forgot batteries so we focused today on constructing our house. it went pretty well, and we pretty much had everything done. we also made some circuits, but just did’t plug in the battery so we didn’t know if they worked or not. One trial and error we had, was we wanted our house to be upright, but it wasn’t very stable, so we put it on it’s side.




Thursday: Today we got a lot done. We worked on circuits, and making them which i personally found a challenge. Other then that, we also worked on the finishing touches of our house. 

Friday: Today we mainly worked on mesasuring the circuits we had already finished. We ran out of time to finish some of our circuits.

Friday night: I brought home some supplies to make the parallel circuit we haven’t finished. It was very challenging. Everytime, in would become a series, or one of the wire acted as a switch! I ended up not being able to complete it!

Monday: Faith and I figured out how to properely complete our circuit. We then poked holes so we could stick the lights through so our house would look nicer and there owuld be less wires everywhere.

Science post #1

For my Circuit House Project, my group and I (made up of myself, Michelle and Justice), decided to make a wall of lights to go on the bedroom wall. The original design we had planned of three lights on the top, two in the middle and one on the bottom did not light up and set on fire in the Phet, so I decided to change the design to three bulbs on the top and two on the middle and bottom. I also added two 9V batteries instead of one, which made the circuit light up very brightly as it helped add more voltage to the circuit, which was good. I chose this parallel to go in the bedroom because bedrooms have a lot of light since they are such focal points in houses, and parallels’ tend to be brighter. I also see this type of design on a lot of home renovation shows and they always put a wall of light in the bedroom, so I though it would fit best i the bedroom. The power of this circuit is -25.2P. (V= -6 I= 4.20)

Phet diagram.

We decided to put a parallel circuit in the bathroom because bathrooms need a lot of light. Bathrooms need a lot of light because no body wants to poop in the dark and the bathroom is where people get ready, put makeup on and shower, all activities that require proper lighting.



We chose to put a series in the kitchen because kitchens don’t need a lot of light, because you don’t really do much in a kitchen.

We decided to put a parallel circuit in the living room because all that people really do in living rooms is watch television and sit on the couch, both activities that don’t require a lot of light.