blog post #1: Design and Rationale

  1. Kitchen

For the kitchen I chose to use a parallel circuit. I used a parallel circuit because the entrance of the room would be a lot lighter. The front of the room has the most space to cover and in the other end of the room the lighting will be equal. I wanted the light to be equal on the other end because it looks more normal.

2. Living room

For the living room I decided to use a complex circuit, the reason there’s two lights in the back is because we wanted light coming from both sides of the corner. I anted the front of the room to be the brightest because it would be easier to see and there’s the most amount of space to fill at the front.

One thought on “blog post #1: Design and Rationale

  1. Thanks Kyla for your post. Please provide a copy of your schematic drawing so that we can see where the lights will go in your house. The circuit looks good, however they are both complex circuits. You mentioned wanting the lighting to be equal but your current design has different bulbs with different brightness. We can look at your design tomorrow if you like.

Leave a Reply

Your email address will not be published. Required fields are marked *